ID MOUNT FLANGE FACERS
ID MOUNT FLANGE FACERS
We offer a wide variety of rugged and innovative portable flange facers for 0.75 to 120 inch (19.1 to 3050 mm) diameters, for ID mounting. Several of our machines can be configured for facing, milling or both, and many of our models reface, mill, bevel, square, counterbore, or cut end-prep configurations for welding. For easy setup, smaller units use an integral mandrel to quickly lock into place, while the larger units can be installed with a separate mount or chuck to which the facer body is installed.
MODEL BF FLANGE FACER
Simple, safe, and accurate. The model BF is a versatile flange facer designed for flanges ranging from 0.75 inch ID to 4.12 inches OD (19.1 to 104.6 mm).
Specifications:
Facing Diameter: 0.75 in. ID – 4.12 in. OD (19.1 – 104.6 mm)ID Mounting Diameter: 0.625 – 2.875 in. (15.9 – 73 mm)
Feed Rate: 0.005 in. (0.13 mm) per pin
Power Option: Pneumatic or electric
MODEL MSF FLANGE FACER
The model MSF Flange Facer resurfaces flanges from 1.25 inches ID to 6.19 inches OD (31.8 to 157.2 mm) quickly and accurately. Works with our BG50 BOILER GUN™ for quick and easy conversion between beveling and flange facing in the field.
Specification:
Facing Diameter: 1.25 in. ID – 6.19 in. OD (31.8 – 157.2 mm)ID Mounting Diameter: 1 – 5 in. (25.4 – 127 mm) Feed Rate 0.005 in. (0.13 mm) per pin
Power Option: Pneumatic or electric
MODEL MTF FLANGE FACER
The model MTF resurfaces flanges ranging from 3.25 inches ID to 10.63 inches OD (82.6 to 270.0 mm) quickly and accurately. Works with our PB8 POWER BEVELER for quick and easy conversion between beveling and flange facing in the field.
Specifications:
Facing Diameter: 3.25 in. ID – 10.63 in. OD (82.6 – 270 mm)ID Mounting Diameter: 2 – 8.5 in. (50.8 – 215.9 mm)
Feed Rate: 0.005 in. (0.13 mm) per pin
Power Option: Pneumatic or electric
MODEL MFTF FLANGE FACER
Job-tested and field-proven, the model MFTF will accurately resurface raised gasket areas and bolt pattern surfaces from 4.25 inches ID to 16.25 inches OD (108.8 to 412.8 mm).
Specification:
Facing Diameter: 4.25 in. ID – 16.25 in. OD (19.1 – 412.8 mm)Feed Rate: 0.005 in. (0.13 mm) per pin
ID Mounting Diameter: 3 – 13.5 in. (76.2 – 343 mm)
Power Option: Pneumatic or electric
FF3000 FLANGE FACER
One of the most compact and versatile tools of its kind. With its modular design, tool-less set up and a bi-directional, infinitely variable feed, it faces and bevels with remarkable speed and precision. Facing diameters range from 1.5 to 12 inches (38.1 to 304.8 mm).
Specification:
Facing Diameter: 1.5 – 12 inches (38.1 – 304.8 mm)Milling Diameter: N/A
ID Mounting Diameter: 1.5 – 6.75 inches (38.1 – 171.5 mm)
OD Mounting Diameter: N/A
Power Option: Pneumatic
FF4000 FLANGE FACER
Designed for machining mid-sized diameter raised face and flat pipe flanges or beveling pipe with optional beveling head. Sets up in less than 10 minutes and delivers enough power to remove one cubic inch of metal per minute. Facing diameters range from 3 to 19 inches (76.2 to 482.6 mm).
Specification:
Facing Diameter: 3 – 19 inches (76.2 – 482.6 mm)Milling Diameter: N/A
ID Mounting Diameter: 3 – 12.5 inches (76.2 – 317.5 mm)
OD Mounting Diameter: N/A
Power Option: Pneumatic
FF5000 FLANGE FACER
A two-piece mounting system makes this low profile unit easy to set up and align. Lightweight and simple to use whether you’re facing, beveling or turning valve, pipe or pump flanges. Facing diameters range from 5 to 24 inches (127 to 609.6 mm).
Specification:
Facing Diameter: 5 – 24 inches (127 – 609.6 mm)Milling Diameter: N/A
ID Mounting Diameter: 5 – 18 inches (88.9 – 457.2 mm)
OD Mounting Diameter: N/A
Minimum Swing Diameter: 19 inches (482.6 mm)
Power Option: Pneumatic
FF5300 FLANGE FACER
Forged from 40 years of flange facing experience, the FF5300 Flange Facer sets a new standard in compact flange facing. Easy to set-up and run with a new modular design including an interchangeable turning arm, giving users the flexibility to go out to 40 inches (1,016 mm) and still produce the desired finish. Powerful and simple to use whether you’re facing, beveling or turning valve, pipe, or pump flanges. Comes with a more compact swing diameter with a minimum clearance of 22.75 inches (577.9 mm). Facing diameters range from 5.7 to 40 inches (144.8 to 1016 mm).
FF6300 FLANGE FACER
Performance, versatility, and safety. Delivers high-torque performance to quickly re-surface flanges and repair sealing and bearing surfaces efficiently and cost-effectively. Can be configured in either ID, OD, or surface-mount configurations for a variety of machining applications, with a quick and easy changeover. Facing diameters range from 11.8 to 60 inches (299.7 to 1524.0 mm).
Specification:
ID Facing Diameter: 11.8 – 60 inches (299.7 – 1524.0 mm)Milling Diameter: N/A
ID Mounting Diameter: 11.8 – 57.5 inches (299.7 – 1460.5 mm)
OD Facing Diameter: 8.5 – 60 inches (215.9 – 1524.0 mm) OD Mounting Diameter: 38.1 – 63.8 inches (967.7 – 1620.5 mm) Power Option: Pneumatic or Hydraulic
FF7200 FLANGE FACER
A heavy-duty flange facer with both facing AND milling capabilities. The FF7200 Flange Facer features a tool head that rotates a full 360 degrees, infinitely variable feed rates, and remotely adjustable feed so radial and axial feeds can be done quickly and safely. Facing diameters from 30 to 72 inches (762 to 1828.8 mm), milling diameters from 35 to 72 inches (889 to 1828.8 mm).
Specification:
Facing Diameter: 30 – 72 inches (762 – 1828.8 mm)Milling Diameter: 35 – 72 inches (889 – 1828.8 mm)
ID Mounting Diameter: 30 – 72 inches (762 – 1828.8 mm)
OD Mounting Diameter: N/A
Power Option: Pneumatic or Hydraulic
